In sand and gravel factories, impact crushers and hammer crushers are often seen, but it seems that more merchants choose impact crushers. What is the reason for this? There are certain differences between impact crushers and hammer crushers in terms of technical structure, working principle, material handling, and maintenance costs. The general mining machine editor
1. Failure phenomenon: fine-grained Reason: more hammers Solution: Lose a layer or two of hammerheads 2. Failure phenomenon: coarse granularity Reason: loose belt or low speed Solution: Tighten the belt and check if the voltage is 380V 3. Failure phenomenon: the broken body swings Reason: Unbalanced centrifugal force of rotor Solution: replace the hammer with
1. The equipment should be installed at the level of the concrete foundation and fixed with the anchor rod. 2. The installation should pay attention to the main body and vertical level. 3. Check whether some bolts are loose after installation and strengthen the host country’s warehouse door and require tightening. 4. Configure the power
1. Check whether the mechanism has a warehouse door before starting. It is forbidden to open the door during the operation of the machine to prevent danger. 2. The crusher must be empty to start and will be in normal operation before it is under the purpose of production. 3. According to the requirements of
(1) The structure is simple and reasonable, and the operating cost is low. Using the stone-on-stone principle, the wear and tear is small. (2), high crushing rate, energy saving. (3) It has the functions of fine crushing and coarse grinding. (4) It is less affected by the moisture content of the material, and the moisture
The lump ore falls into the upper crushing chamber from the feed hopper and onto the upper throwing disc. With the help of the centrifugal force of the throwing disc, the material is thrown to the inner wall of the cylinder, and violently collides with the counterattack plate installed on the inner wall. At the
A large amount of dust will be generated during the operation of crushers and screening machines. These dusts not only seriously pollute the natural environment in the surrounding areas, but also bring great harm to the health of front-line operators. Long-term dust pollution is likely to cause occupational diseases. In this regard, it is necessary
The price of a complete set of sand making equipment ranges from tens of thousands to millions, which is related to the specific equipment configuration and selection, sometimes small sand making equipment with an output of 200 tons and large sand making equipment with an output of 800 tons per hour. So, what is included
The production output of the sand making machine is closely related to the production efficiency of the sand making machine. If the sand making machine discharges slowly, the output of the sand making machine will decrease, which will affect the production efficiency of the sand making machine. So what are the reasons for the slow
As the saying goes, every line is like a mountain. In recent years, due to the popularity of the ore industry, many investor bosses plan to invest in mining, and a prerequisite is the purchase of high-quality crusher equipment. Many bosses do not understand equipment themselves, so they are easy to follow the trend and